Epoxy, Urethane & Specialty Coatings
Epoxy and urethane coats are great for protecting your floor against stains, damage, chemicals, oils and wear. Both light reflective, easy to clean and long lasting. Epoxy is a thermosetting polymer, available in three different formulations for a coating and sealer; water based, solvent based, and 100% solids. These formulations allow for varying degrees of thickness from 3 mil to over 10 mil. Like epoxy, urethane is a thermosetting polymer as well and is considered a high performance coating.
Crown® by Aervoe® 7008 Brite Galvanizing Compound, 16 oz Container, 26 sq-ft/can Coverage, 24 hr Curing
Crown® by Aervoe® Brite Galvanizing Compound, 16 oz, Aerosol Can, 26 sq-ft/can Coverage, Chemical Composition: Hydrocarbon Propellant, Aliphatic Petroleum Distillates, Zinc Powder, Acetone, n-Butyl Acetate, 24 hr Curing, 50 to 90 deg F, Ketone
Call for pricing
Carboline A-788 Splash Zone, Liquid Form, Olive Green, 1588 at 1.0 mils, 13 at 125.0 mils sq-ft/gal Coverage, 36 at 50 deg F hr Curing
Carboline, A-788, Splash Zone, Liquid Form, Olive Green, Flat, 1588 at 1.0 mils, 13 at 125.0 mils sq-ft/gal Coverage, 36 at 50 deg F hr Curing, 40 to 110 deg F, Odor/Scent: Slight Amine
Call for pricing
Crown® by Aervoe® 7008Q Brite Galvanizing Compound, 1 qt Container, Bulk Liquid Form, 668 sq-ft/gal Coverage, 72 hr Curing
Crown® by Aervoe® Brite Galvanizing Compound, 1 qt, Can, Bulk Liquid, 50 to 60 ku Viscosity, 668 sq-ft/gal Coverage, Chemical Composition: Hydrocarbon Propellant, Aliphatic Petroleum Distillates, Zinc Powder, Acetone, n-Butyl Acetate, 72 hr Curing, 50 to 90 deg F, <500 g/L VOC, Ketone
Call for pricing