Fasteners

HILTI Cartridge Holder, Series: HIT-CB, For Use With: 3:1 Adhesive Anchor Cartridges, Black

HILTI Epoxy Adhesive Mortar, Series: HIT-RE 500 V3, Can Container, 16.9 fl-oz Container, Composition: Part A: Bisphenol-A-Epichlorhydrin Epoxy resin, Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol, butanedioldiglycidyl ether, 1,3 Propanediol, 2 ethyl-2-(hydroxymethyl)-, polymer with 2-(chloromethyl)oxirane, [3-(2,3-epoxypropoxy)propyl]trimethoxysilane/Part B: 2-methyl-1,5-pentanediamine, Quartz, Phenol, styrenated, m-Xylylenediamine, 2,4,6-tris(dimethylaminomethyl)phenol, 3-Aminopropyltriethoxysilan, Mixture Form, Part A: Light Gray/Part B: Red, Part A: Characteristic/Part B: Amine Odor/Scent, -40 to 158 deg F, Part A: >200 deg F, Part B: >200 deg F Flash Point, Part B: 11.5 pH, Part A: 45 to 59 Pa s/Part B: 50 to 70 Pa s Viscosity, Flammability: 1, Applicable Materials: Concrete

HILTI Anchor Dispensing Tool, Series: HDM 500, Manually Driven Power Source, Black/Red

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 3/8-16 Thread, 1-1/4 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 1 in ID Eye, 1-21/32 in OD Eye, UNC-2A Thread, 3.09 to 3.47 in Overall Length, 1300 lb Working Load, 1-1/4 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 1/2-13 Thread, 1-1/2 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 1-3/16 in ID Eye, 2-1/16 in OD Eye, UNC-2A Thread, 3.81 to 4.19 in Overall Length, 2400 lb Working Load, 1-1/2 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 9/16-12 Thread, 1-5/8 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 1-9/32 in ID Eye, 2-9/32 in OD Eye, UNC-2A Thread, 4.19 to 4.56 in Overall Length, 3000 lb Working Load, 1-5/8 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Imperial, 3/4-10 Thread, 2 in Shank Length, Drop Forged Carbon Steel, Self-Colored, 2-1/2 in ID Eye, 2-13/16 in OD Eye, UNC-2A Thread, 5.06 to 5.5 in Overall Length, 5000 lb Working Load, 2 in Thread Length, 65000 to 90000 psi Tensile Strength, Material Specification: ASTM A489

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Metric, M10x1.5 Thread, 35 mm Shank Length, Drop Forged Carbon Steel, Self-Colored, 27 mm ID Eye, 46 mm OD Eye, Coarse Thread, 96 mm Overall Length, 1628 lb Working Load, 35 mm Thread Length, 65000 to 90000 psi Tensile Strength

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Metric, M12x1.75 Thread, 38 mm Shank Length, Drop Forged Carbon Steel, Self-Colored, 30 mm ID Eye, 54 mm OD Eye, Coarse Thread, 106.4 mm Overall Length, 2266 lb Working Load, 38 mm Thread Length, 65000 to 90000 psi Tensile Strength

KEN FORGING Eye Bolt, Fully Threaded Shoulder Pattern, Measurement System: Metric, M16x2 Thread, 44 mm Shank Length, Drop Forged Carbon Steel, Self-Colored, 35 mm ID Eye, 65 mm OD Eye, Coarse Thread, 125.4 mm Overall Length, 3520 lb Working Load, 44.5 mm Thread Length, 65000 to 90000 psi Tensile Strength

Proto® Eye Bolt, Full Threaded Shoulder Pattern, Measurement System: Imperial, 1/2-13 Thread, 1-1/2 in Shank Length, Forged Steel, Plain, 1.12 to 1.25 in ID Eye, 2.12 in OD Eye, UNC-2A Thread, 4.19 in Overall Length, 2400 lb Working Load, 1-1/2 in Thread Length, Material Specification: ASME B18.15

Chicago Hardware Machinery Eye Bolt, Shoulder Pattern Threaded, Measurement System: Imperial, 9/16-12 Thread, 4-1/2 in Shank Length, Heat Treated Drop Forged Steel, Self-Colored, UNC Thread, Special Shank

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 5/16 in Thread, 4-1/4 in Shank Length, Forged Steel, Hot Dipped Galvanized, 0.62 in ID Eye, 1.12 in OD Eye, UNC Thread, 5-1/2 in Overall Length, 1200 lb Working Load, 2-1/2 in Thread Length

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 3/8 in Thread, 4-1/2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 3/4 in ID Eye, 1.38 in OD Eye, UNC Thread, 5.97 in Overall Length, 1550 lb Working Load, 2-1/2 in Thread Length

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 1/2 in Thread, 6 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1 in ID Eye, 1-3/4 in OD Eye, UNC Thread, 7.88 in Overall Length, 2600 lb Working Load, 3 in Thread Length

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 5/8 in Thread, 4 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1-1/4 in ID Eye, 2-1/4 in OD Eye, UNC Thread, 6.44 in Overall Length, 5200 lb Working Load, 2 in Thread Length

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 5/8 in Thread, 6 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1-1/4 in ID Eye, 2-1/4 in OD Eye, UNC Thread, 8.44 in Overall Length, 5200 lb Working Load, 3 in Thread Length

Crosby® Eye Nut, Series: G-400, Measurement System: Imperial, 5/8 in Thread, Forged Steel, Hot Dipped Galvanized, 3600 lb Working Load, 1-1/2 in Eye ID, 2-1/2 in OD Eye, 0.69 in Thread Length, 3-1/4 in Overall Height, Material Grade: ASME B30.26, UNC Thread

Crosby® Eye Nut, Series: G-400, Measurement System: Imperial, 3/4 in Thread, Forged Steel, Hot Dipped Galvanized, 5200 lb Working Load, 1-3/4 in Eye ID, 3 in OD Eye, 0.88 in Thread Length, 3.89 in Overall Height, Material Grade: ASME B30.26, UNC Thread

Crosby® Eye Nut, Series: G-400, Measurement System: Imperial, 1 in Thread, Forged Steel, Hot Dipped Galvanized, 10000 lb Working Load, 2-1/4 in Eye ID, 4 in OD Eye, 1.07 in Thread Length, 5.01 in Overall Height, Material Grade: ASME B30.26, UNC Thread

Crosby® Eye Nut, Series: G-400, Measurement System: Imperial, 1-1/4 in Thread, Forged Steel, Hot Dipped Galvanized, 15500 lb Working Load, 2-1/2 in Eye ID, 4-1/2 in OD Eye, 1-1/4 in Thread Length, 5.78 in Overall Height, Material Grade: ASME B30.26, UNC Thread

Crosby® Eye Bolt, Full Threaded Machinery Shoulder, Series: S-279, Measurement System: Imperial, 1-3/4-5 Thread, 3-3/4 in Shank Length, Forged Steel, 3-1/2 in ID Eye, 6.26 in OD Eye, UNC Thread, 10.48 in Overall Length, 34000 lb Working Load

Crosby® Eye Bolt, Full Threaded Machinery Shoulder, Series: S-279, Measurement System: Imperial, 2-1/2-4 Thread, 5 in Shank Length, Forged Steel, 4-1/2 in ID Eye, 8.76 in OD Eye, UNC Thread, 14.88 in Overall Length, 65000 lb Working Load

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 3/4 in Thread, 6 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1-1/2 in ID Eye, 2-3/4 in OD Eye, UNC Thread, 8.94 in Overall Length, 7200 lb Working Load, 3 in Thread Length

Crosby® Eye Bolt, Series: G-277, Measurement System: Imperial, 1 in Thread, 6 in Shank Length, Forged Steel, Hot Dipped Galvanized, 2 in ID Eye, 3-3/4 in OD Eye, UNC Thread, 9.97 in Overall Length, 13300 lb Working Load, 3 in Thread Length