Holemaking
Holemaking is a machining operation that are specifically used to cut a hole into a workpiece. Drilling, reaming, tapping, boring are different hole making operations.
Drillco 1000C140 Imperial Silver and Deming Drill, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
Drillco Silver and Deming Drill, Imperial, Series: 1000C, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 6 in Overall Length, 3 in Cutting Depth, Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split/Self-Centering Point, Cobalt Cutting Edge, Cobalt, Oxide Treated, Applicable Materials: Tough and High Tensile Strength Materials
Call for pricing
Total Stock Available : 29 |
Drillco 1000E8 Silver and Deming Drill Set, 9/16 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 8 Pieces, HSS, Uncoated
Drillco Silver and Deming Drill Set, Series: 1000E, Imperial System of Measurement, 9/16 in Minimum Drill Bit Size, 1 in Maximum Drill Bit Size, 118 deg Drill Point Angle, 8 Piece, Specifications: 1/2 in Reduced Shank, HSS, Uncoated
Call for pricing
Total Stock Available : 0 |
Cle-Line® Cle-Force™ C68241 1602 Heavy Duty Jobber Length Drill Bit, E Drill - Letter, 0.25 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Cle-Line® Cle-Force™ Jobber Length Drill Bit, Heavy Duty, Series: 1602, Imperial, E Drill - Letter, 0.25 in Drill - Decimal Inch, 4 in Overall Length, 2-3/4 in Cutting Depth, 2 Flutes, Right Spiral Flute, 2-3/4 in Flute Length, 1/4 in Dia x 1-1/4 in L Shank, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, No Through Coolant, HSS, Oxide Treated, Applicable Materials: Alloy Steel, Carbon Steel, Gray Cast Iron, Low Carbon Steel and Nodular Cast Iron
Call for pricing
Total Stock Available : 1125 |
Milwaukee® 48-20-3944 4-Cutter Rotary Hammer Drill Bit, 7/8 in Drill Bit, 45/64 in SDS-Max Shank, 8 in D Cutting, Carbide Cutting Edge, 13 in OAL
Milwaukee® Rotary Hammer Drill Bit, 4-Cutter, 7/8 in Drill Bit, 13 in Overall Length, 8 in Cutting Depth, 8 in Flute Length, 45/64 in Shank, SDS-Max Shank, Centering Point, Right Hand Cutting Direction, Carbide Cutting Edge, High Carbon Steel, Uncoated, Silver, Applicable Materials: Block, Brick, Concrete and Reinforced Concrete
Call for pricing
Total Stock Available : 40 |
Milwaukee® MX4™ 48-20-3953 4-Cutter Rotary Hammer Drill Bit, 1 in Drill Bit, 45/64 in, 12 in D Cutting, Carbide Cutting Edge, 17 in OAL
Milwaukee® MX4™ Rotary Hammer Drill Bit, 4-Cutter, 1 in, 17 in Overall Length, 12 in Cutting Depth, 12 in Flute Length, 45/64 in Shank, Centering Point, Right Hand Cutting, Carbide Cutting Edge, High Carbon Steel, Uncoated, Silver, Applicable Materials: Block, Brick, Concrete and Reinforced Concrete
Call for pricing
Total Stock Available : 1 |
Milwaukee® M12™ 48-20-7072 2-Cutter Heavy Duty Rotary Hammer Drill Bit, 7/8 in Drill Bit, 25/64 in SDS Shank, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
Milwaukee® M12™ Rotary Hammer Drill Bit, 2-Cutter Heavy Duty, 7/8 in Drill Bit, 12 in Overall Length, 10 in Cutting Depth, 4 Flutes, Spiral Flute, 10 in Flute Length, 25/64 in Shank, SDS Shank, Centering Point, Right Hand Cutting Direction, Carbide Cutting Edge, Steel, Applicable Materials: Concrete and Masonry
Call for pricing
Total Stock Available : 53 |
Milwaukee® MX4™ 48-20-7236 4-Cutter Rotary Hammer Drill Bit, 7/8 in Drill Bit, 25/64 in, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® MX4™ Rotary Hammer Drill Bit, 4-Cutter, 7/8 in, 18 in Overall Length, 16 in Cutting Depth, 4 Flutes, Spiral Flute, 16 in Flute Length, 25/64 in Shank, Centering Point, Right Hand Cutting, Carbide Cutting Edge, Carbon Steel, Uncoated, Silver, Applicable Materials: Concrete, Masonry and Reinforced Concrete
Call for pricing
Total Stock Available : 6 |
Milwaukee® M12™ 48-20-7432 2-Cutter Rotary Hammer Drill Bit, 1/4 in Drill Bit, 25/64 in SDS-Plus Shank, 6 in D Cutting, Carbide Cutting Edge, 8 in OAL
Milwaukee® M12™ Rotary Hammer Drill Bit, 2-Cutter, 1/4 in Drill Bit, 8 in Overall Length, 6 in Cutting Depth, 4 Flutes, Spiral Flute, 6 in Flute Length, 25/64 in Shank, SDS-Plus Shank, Centering Point, Right Hand Cutting Direction, Carbide Cutting Edge, Uncoated, Silver, Applicable Materials: Block, Brick and Concrete
Call for pricing
Total Stock Available : 135 |
Milwaukee® M12™ 48-20-7438 2-Cutter Rotary Hammer Drill Bit, 1/4 in Drill Bit, 25/64 in SDS-Plus Shank, 18 in D Cutting, Carbide Cutting Edge, 20 in OAL
Milwaukee® M12™ Rotary Hammer Drill Bit, 2-Cutter, 1/4 in Drill Bit, 20 in Overall Length, 18 in Cutting Depth, 4 Flutes, Spiral Flute, 18 in Flute Length, 25/64 in Shank, SDS-Plus Shank, Centering Point, Right Hand Cutting Direction, Carbide Cutting Edge, Carbon Steel, Uncoated, Silver, Applicable Materials: Concrete and Masonry
Call for pricing
Total Stock Available : 18 |
Milwaukee® Magnum™ 48-20-7490 Rotary Hammer Drill Bit Set, 5 Pieces, For Use With 3/16 in, 1/4 in Concrete Screw, Hex Washer Head and Flat Head Screw, Carbide
Milwaukee® Magnum™ Rotary Hammer Drill Bit Set, 5 Piece, Specifications: 2-Cutter, SDS-Max® Shank, For Use With: 3/16 in, 1/4 in Concrete Screw, Hex Washer Head and Flat Head Screw, Carbide
Call for pricing
Total Stock Available : 31 |
Milwaukee® 48-27-0621 Flat Boring Bit, 5/8 in Dia, 6-1/8 in OAL, Flat Flute, 1/4 in Shank
Milwaukee® Flat Boring Bit, Stubby Drill Style, 5/8 in Diameter, 6-1/8 in Overall Length, Flat Flute, 1/4 in Shank, Hex Shank, Right Hand Cutting Direction, High Carbon Steel Cutting Edge, HSS, Silver
Call for pricing
Total Stock Available : 12 |
Milwaukee® 48-28-4008 Bit Extension, 3/8 in Shank, 12 in L
Milwaukee® Bit Extension, 3/8 in Shank, 12 in Length, HSS, For Use With: 3/8 in Hex Shank Hole Saw Arbors, 3-Jawed Chucks
Call for pricing
Total Stock Available : 26 |
Irwin® Unibit® 10221 Hole Enlarging Step Drill Bit, 13/16 in Dia Min Hole, 1-3/8 in Dia Max Hole, 10 Steps, 10 Hole Sizes, 7/16 in Shank
Irwin® Unibit®, 10221, Hole Enlarging Step Drill Bit, Imperial, #21 Letter/Wire, 13/16 in Diameter Minimum Hole, 1-3/8 in Diameter Maximum Hole, 2-11/16 in Overall Length, 10 Steps, 1/8 in Step Depth, 10 Hole, 1 Flutes, 10, 7/16 in Shank, 3-Flat Shank, SpeedPoint®, HSS Cutting Edge, Uncoated, Applicable Materials: Aluminum, Brass, Copper, Laminates, Plastic and Stainless Steel
Call for pricing
Total Stock Available : 197 |
Irwin® Unibit® 10225 Step Drill Set, #21 Min Drill Bit, #1 Max Drill Bit, 4 Pieces, HSS, Uncoated
Irwin® Unibit®, 10225, Step Drill Set, Imperial System of Measurement, #21 Minimum Drill Bit Size, #1 Maximum Drill Bit Size, 4 Piece, Specifications: 3-Flat 7/16 in Hex Shank, Standard Point, 3-1/2 in L, HSS, Uncoated, Black, 3-1/2 in L Dimensions
Call for pricing
Total Stock Available : 2 |
Irwin® Unibit® 10231 Step Drill Bit, 1/8 in Dia Min Hole, 1/2 in Dia Max Hole, 13 Steps, HSS, 13 Hole Sizes, 1/4 in Shank
Irwin® Unibit® Step Drill Bit, Imperial, #1 Letter/Wire, 1/8 in Minimum Hole Dia, 1/2 in Maximum Hole Dia, 13 Steps, 1/32 in Step Depth, 13 Hole Sizes, 1 Flutes, 1/4 in Shank, Hex Shank, Self-Starting SpeedPoint® Point, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Aluminum, Brass, Copper, Laminates, Plastic and Stainless Steel
Call for pricing
Total Stock Available : 4 |
Irwin® WeldTec™ 3043005 Ship Auger Bit, 1/2 in Dia, 17 in OAL, 12 in L Hollow Center Flute, 3/8 in Shank
Irwin® WeldTec™ Ship Auger Bit, Drill Style: Auger, 1/2 in Diameter, 17 in Overall Length, 1 Flute, Hollow Center Flute, 12 in Flute Length, 3/8 in Shank, Hex/Quick-Change Impact Shank, Right Hand Cutting Direction, Carbon Steel Cutting Edge, Carbon Steel, Uncoated
Call for pricing
Total Stock Available : 14 |
Lenox® 30912VB12 Step Drill Bit, 7/8 in Dia Min Hole, 1-3/8 in Dia Max Hole, 5 Steps, HSS, 5 Hole Sizes, 3/8 in Shank
Lenox® Step Drill Bit, Imperial, 7/8 in Diameter Minimum Hole, 1-3/8 in Diameter Maximum Hole, 3 in Overall Length, 5 Steps, 1/4 in Step Depth, 5 Hole, 2 Flutes, 3/8 in Shank, 3-Flat Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Oxide Treated, Applicable Materials: Most Metals and Stainless Steel
Call for pricing
Total Stock Available : 8 |
Hougen® RotaCut™ 11089 Triple Flatted Arbor With 03913C Pilot Drill, For Use With 3/8 in Chucks and 3/8 to 3/4 in Cutter
Hougen® RotaCut™ Arbor, Triple Flatted, For Use With: 3/8 in Chucks and 3/8 to 3/4 in Cutter, 3/8 in Dia
Call for pricing
Total Stock Available : 0 |
Hougen® Rotabroach® 12138 12000 Annular Cutter, 1-3/16 in Dia Cutter, 1 in D Cutting, M2 HSS, Uncoated, 2-Flat Shank
Hougen® Rotabroach® Annular Cutter, Series: 12000, 1-3/16 in Diameter Cutter, 1 in Cutting Depth, 3/4 in Shank, 2-Flat Shank, M2 HSS, Uncoated, Applicable Materials: Mild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
Call for pricing
Total Stock Available : 0 |
Hougen® Rotabroach® 12164 12000 Annular Cutter, 2 in Dia Cutter, 1 in D Cutting, M2 HSS, Uncoated, 2-Flat Shank
Hougen® Rotabroach® Annular Cutter, Series: 12000, 2 in Diameter Cutter, 1 in Cutting Depth, 3/4 in Shank, 2-Flat Shank, M2 HSS, Uncoated, Applicable Materials: Mild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
Call for pricing
Total Stock Available : 0 |
Hougen® Rotabroach® 12217 12000 Annular Cutter, 17/32 in Dia Cutter, 2 in D Cutting, M2 HSS, Uncoated, 2-Flat Shank
Hougen® Rotabroach® Annular Cutter, Series: 12000, 17/32 in Diameter Cutter, 2 in Cutting Depth, 3/4 in Shank, 2-Flat Shank, M2 HSS, Uncoated, Applicable Materials: Mild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
Call for pricing
Total Stock Available : 0 |
Hougen® Rotabroach™ 12270 12000 Imperial Annular Cutter, 2-3/16 in Dia Cutter, 2 in D Cutting, M2 HSS, 2-Flat Shank
Hougen® Rotabroach™ Annular Cutter, Imperial, Series: 12000, 2-3/16 in Diameter Cutter, 2 in Cutting Depth, 3/4 in Shank, 2-Flat Shank, M2 HSS Cutting Edge, M2 HSS
Call for pricing
Total Stock Available : 0 |
Hougen® Rotabroach® 12274 12000 Annular Cutter, 2-5/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Uncoated, 2-Flat Shank
Hougen® Rotabroach® Annular Cutter, Series: 12000, 2-5/16 in Diameter Cutter, 2 in Cutting Depth, 3/4 in Shank, 2-Flat Shank, M2 HSS, Uncoated, Applicable Materials: Mild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
Call for pricing
Total Stock Available : 0 |
Hougen® RotaLoc™ 17124 17000 Stack Cut Geometry Annular Cutter, 3/4 in Dia Cutter, 3/4 in D Cutting, M42 HSS, Uncoated, Quick-Change Shank
Hougen® RotaLoc™ Annular Cutter, Stack Cut Geometry, Series: 17000, 3/4 in Diameter Cutter, 3/4 in Cutting Depth, 5/8 in Shank, Quick-Change Shank, M42 HSS, Uncoated, Applicable Materials: Mild Steel, Stainless Steel and Harder Steel
Call for pricing
Total Stock Available : 0 |
Hougen® RotaLoc™ 17128 Imperial Annular Cutter, 7/8 in Dia Cutter, 3/4 in D Cutting, M42 HSS, Quick-Change Shank
Hougen® RotaLoc™ Annular Cutter, Imperial, 7/8 in Diameter Cutter, 3/4 in Cutting Depth, 5/8 in Shank, Quick-Change Shank, M42 HSS-Co Cutting Edge, M42 HSS
Call for pricing
Total Stock Available : 0 |
Refine