Walter Surface Technologies

Drillco Tap Set, Straight Flute, Series: 2000, Measurement System: Imperial, 3 Piece, 1/4-20, UNC, 1 in Thread Length, 2-1/2 in Overall Length, 4 Flutes, Right Hand Cutting, Taper/Plug/Bottoming Chamfer, H3 Thread Limit, #7 Tap Drill, HSS, Bright

Drillco Straight Flute Tap, Series: 2000, Measurement System: Imperial, UNC Thread Standard, #8-32 Thread, Tapered Chamfer, 4 Flutes, HSS, Bright, Right Hand Cutting Direction, 3/4 in Thread Length, 2-1/8 in Overall Length, H3 Thread Limit

Drillco Straight Flute Tap, Series: 2000, Measurement System: Imperial, UNF, #10-32, Tapered Chamfer, 4 Flutes, HSS, Bright, Right Hand Cutting, 7/8 in Thread Length, 2-3/8 in Overall Length, H3 Thread Limit

Drillco Straight Flute Tap, Series: 2000, Measurement System: Imperial, UNC Thread Standard, 3/4-10 Thread, Bottoming Chamfer, 4 Flutes, HSS, Bright, Right Hand Cutting Direction, 2 in Thread Length, 4-1/4 in Overall Length, H3 Thread Limit

Drillco Screw Machine Length Drill, Type C Heavy Duty Stub Length, Series: 380, Imperial, #30 Drill - Wire, 0.0551 in Drill - Decimal Inch, 1-15/16 in Overall Length, 15/16 in Cutting Depth, Spiral Flute, 15/16 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Black Oxide, Applicable Materials: Stainless Steel and Titanium

Drillco Jobber Length Drill Bit, Type J Heavy Duty, Series: 500, Imperial, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 3-1/2 in Overall Length, 2-5/16 in Cutting Depth, 2 Flutes, Spiral Flute, 2-5/16 in Flute Length, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, Cobalt Cutting Edge, No Through Coolant, Cobalt, Bronze, Applicable Materials: Stainless Steel, Titanium, High Temperature and High Strength Alloys